KLW TrainSim:
NJ Transit GP40PH-2 #4100 v1.0
01/23/08
By Kurt Kaminer - KLW TrainSim
www.klw-trainsim.com
---------------------------------
Please turn Word Wrap (under "VIEW") on.
---------------------------------

REQUIRED FILES:

* KLW 40 Series Soundpack v4.1, or v4.0 + 4.1 update
* KLW Locomotive Common Sound Pack v1.0
* Microsoft: Train Simulator Update v1.2
* MSTSbin 1.7.x or higher

-----------------------

INFORMATION:

This new model comes complete with matching cabview, based on the cab from the MSTS v1.2 SD40-2, our tried and true K5LA recording, and new bell sounds, physics by Dan Garcia plus the brand new GP40PH-2 model itself. Lighting is MSTSbin-specific, and is based on prototype information provided by NJT engineer Nick Jacovinni. Model comes with two LODs.

Lighting is MSTSbin-specific. If you wish to run these units out of MSTSbin, that is fine, but be prepared to make some modifications. Lights include main headlights + ditchlights, double strobes as per the prototype, and reverse lights for when running the unit at the rear of a consist, or long hood forward.

The .SMS files, courtesy of Ron Furto, used with the new KLW 40 Series Sounds v4.1 (seperate, required download), represent an EMD 645 running in a standard configuration from N1 through N8, while HEP sounds (courtesy Nick Jacovinni) from the Locomotive Common Sound Pack provide the effects of a seperate HEP generator and CAT powerplant. The HEP generator will run at two "constant" speeds - a low idle when the main prime mover is at idle (apparently, the prime mover generator will supply part of the HEP current at idle on these units - even though it runs a seperate CAT generator system), and will spin up to a higher RPM when the prime mover is notched up from idle to Run 1.

Hope you enjoy. 

-Kurt

---------------------------------

LEGAL:

Refer to KLW website for latest respective EULA. 

Distribution/modification/re-release prohibited in the event of site outage/temporary EULA dissapearance, etc.

Distribution is limited to the Members section of KLW TrainSim.

---------------------------------

CREDITS:

-3D Model:
--Kurt Kaminer

-Textures:
--Kurt Kaminer

-SD40-2 base blank textures:
--Scott M. Miller

-Lighting
--Kurt Kaminer

-ENG file:
--Dan Garcia

-SMS files and prime mover alogorithm:
--Ron Furto
--Additional Furto content is contained in the KLW Loco Common Sound Pack - please see Readme for that package

-Cabview:
--Kurt Kaminer (based on MS v1.2 original)

-Sound recordings:
--Michael Hansen
--Nicholas A. Jacovinni
--Evan Werkema
--Additional Hansen and Jacovinni content is contained in the KLW Loco Common Sound Pack and 40 Series v4.1 - please see Readme for that package.

Prototype Reference:
--Nicholas A. Jacovinni
--Anthony Wood 

---------------------------------

Kurt K.
KLW TrainSim
www.klw-trainsim.com