KLW TrainSim:
NJ Transit GP40-2 #4300 v1.0
02/04/08
By Kurt Kaminer - KLW TrainSim
www.klw-trainsim.com
---------------------------------
Please turn Word Wrap (under "VIEW") on.
---------------------------------

REQUIRED FILES:

* KLW NJ Transit GP40PH-2 #4100
* KLW 40 Series Soundpack v4.1, or v4.0 + 4.1 update
* KLW Locomotive Common Sound Pack v1.0
* Microsoft: Train Simulator Update v1.2
* MSTSbin 1.7.x or higher

-----------------------

NOTE:

This unit dedicated to Nicholas A. Jacovinni - thank you so very much for all your help with the GP40PH-2's and the GP40FH-2.

-----------------------

INFORMATION:

Our final model for the NJ Transit line concludes with this NJT-specific GP40-2 model, representing the examples of these units presently on the NJT roster. This model of #4300 was built according to prototype photos, and features the K5LA, strobes, short PC nose brake lever opening, cab-top AC, and reversing lights as on the four NJT prototypes. Lighting is MSTSbin-specific, and is based on prototype information provided by NJT engineer Nick Jacovinni.

Note about the lighting: If you wish to run these units out of MSTSbin, that is fine, but be prepared to make some modifications. Lights include main headlights + ditchlights, double strobes as per the prototype, and reverse lights for when running the unit at the rear of a consist, or long hood forward.

The .SMS files, courtesy of Ron Furto, used with the new KLW 40 Series Sounds v4.1 (seperate, required download), represent an EMD 645 running in a standard configuration from N1 through N8. If you already have the GP40PH-2 #4100 unit installed (required for cab), you should already have these required soundpacks for use with this locomotive.

Hope you enjoy. 

-Kurt

---------------------------------

LEGAL:

Refer to KLW website for latest respective EULA. 

Distribution/modification/re-release prohibited in the event of site outage/temporary EULA dissapearance, etc.

Distribution is limited to the Members section of KLW TrainSim.

---------------------------------

CREDITS:

-3D Model:
--Kurt Kaminer

-Textures:
--Kurt Kaminer

-SD40-2 base blank textures:
--Scott M. Miller

-Modification of blanks to 1024x1024 w/additional details:
--Michael Worden

-Lighting
--Kurt Kaminer

-ENG file:
--Dan Garcia

-SMS files and prime mover alogorithm:
--Ron Furto
--Additional Furto content is contained in the KLW Loco Common Sound Pack - please see Readme for that package

-Cabview:
--Kurt Kaminer (based on MS v1.2 original)

-Sound recordings:
--Michael Hansen
--Nicholas A. Jacovinni
--Evan Werkema
--Additional Hansen and Jacovinni content is contained in the KLW Loco Common Sound Pack and 40 Series v4.1 - please see Readme for that package.

Prototype Reference:
--Nicholas A. Jacovinni
--Anthony Wood 

---------------------------------

Kurt K.
KLW TrainSim
www.klw-trainsim.com